Home How to How to Access BIOS in Windows 10 (Dell/Asus/ HP)

How to Access BIOS in Windows 10 (Dell/Asus/ HP)

by Martin
Access BIOS in Windows 10

In this essay, we will go through all of the strategies in depth to Access BIOS in Windows 10.

Microsoft Windows 10 includes several advanced tools that might help you improve the efficiency of your device. The Advanced boot options feature is one of those tools used to troubleshoot most Windows 10 issues. The more familiar you become with your smartphone, the more you will want to customize it. To avoid system problems, keep your system up to date. What if you run into any difficulties? Windows advanced boot options allow you to reset your PC, boot your device to a different operating system, restore it, use “Startup Repair” to fix startup issues, and start Windows in Safe Mode to troubleshoot the other problems.

On older devices (Windows XP, Vista, or Windows 7), the BIOS could be accessed by pressing the F1 or F2, or DEL key as the computer booted. Modern devices include a new form of BIOS known as the User Extensible Firmware Interface (UEFI). If you use a one-of-a-kind device, your system employs UEFI mode (Unified Extensible Firmware Interface) rather than the legacy BIOS (Basic Input/Output System). How do I get to the Advanced Boot Options and the BIOS in Windows 10? There are several methods for gaining access to this feature, each with its purpose.

6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP)

Make sure to create a restore point just in case something goes wrong.

If you have access to your Desktop

If your Windows operating system is up and running and you have access to your desktop, the methods listed below will get you access to the BIOS in Windows 10.

Method 1: Press & Hold Shift Key and Restart your device

1. Select the Start button, then the Power symbol.

2. Hold down the Shift key and select Restart from the power menu.

3. Reboot your smartphone while holding down the Shift key.

4. When the system restarts, select Troubleshoot from the Choose an option screen.

5. From the Troubleshoot page, select Advanced Options.

6. From the Advanced Options menu, select UEFI Firmware Settings.

Finally, press the Restart button. You will be in the BIOS as soon as your computer restarts after this process.

Following a restart, Windows will open in the BIOS menu. It is the quickest way to get to the BIOS on Windows 10. All you need to remember is to press and hold the Shift key while rebooting your device.

Method 2: Access BIOS options through Settings

Unfortunately, if you do not have access to the approach mentioned above, you can use this one instead. It might be beneficial to navigate to the System Settings section here.

1. Navigate to Windows Settings and select the Update & Security option.

2. Select the Recovery option from the left pane.

3. Locate the Restart Now option under Advanced Startup and select it.

4. When the system restarts, select Troubleshoot from the Choose an option screen.

5. From the Troubleshoot page, select Advanced Options.

6. From the Advanced Options menu, select UEFI Firmware Settings.

7. Finally, press the Restart button. You will be in the BIOS as soon as your computer restarts after this process.

Method 3: Access BIOS options through Command Prompt

If you are a techie, you can access Advanced Boot Options via the command prompt.

1. Press Windows +X, then select Command Prompt or Windows PowerShell with administrative privileges.

2. Type shutdown.exe /r /o and press Enter at the elevated command window.

When you run the command, you will receive a notice informing you that you are being signed out. Once you close it, Windows will reboot with boot choices. However, it will take some time to restart. When the computer restarts, repeat steps 4 through 7 from the previous technique to access the BIOS in Windows 10.

If you do not have access to your computer’s desktop

If your Windows operating system is not functioning correctly and cannot reach your desktop, the procedure outlined below will assist you in accessing the BIOS in Windows 10.

Method 1: Force Windows Operating System to Start in Boot Options

If your Windows fails to boot correctly, it will boot into advanced boot options mode. It is a built-in feature of the Microsoft Windows operating system. If a crash causes your Windows to fail to boot correctly, it will start automatically in Advanced boot options. What if Windows freezes during the boot process? Yes, it may happen to you.

In that case, you must crash Windows and force it to boot into Advanced Boot Options.

1. Turn on your device and, as soon as you see the Windows logo, press and hold the Power button until your system shuts down.

Note: Make sure it does not get past the boot screen, or else you will have to restart the process.

2. Repeat this three times in a row since when Windows 10 fails to boot three times in a row, it enters Automatic Repair mode by default the fourth time.

3. When the PC boots for the fourth time, it will prepare Automatic Repair and give you the option to Restart or Advanced.

To reach the BIOS menu in Windows 10, repeat steps 4–7 from approach 1.

Method 2: Windows Recovery Drive

If the forced shutdown method does not work for you, you can use the Windows recovery disc. It may assist you in resolving your Windows startup issue. You will need a Windows recovery drive or disc for this. That is great if you have one. Otherwise, you will have to establish one on one of your friends’ systems. You connect your Windows recovery drive (CD or Pen drive) to your device and restart it with this drive or disc.

Method 3: Windows Installation drive/disc

You can also access advanced boot options by using a Windows installation drive or disc. All you have to do is connect the bootable drive or disc to your computer and restart it.

1. Start your computer by booting from the Windows 10 installation USB or DVD.

2. Choose your preferred language and then click Next.

3. Now, at the bottom, click the “Repair your computer” link.

4. This will launch the Advanced Startup Option, where you must select the Troubleshoot option.

5. From the Troubleshoot page, select Advanced Options.

6. From the Advanced Options menu, select UEFI Firmware Settings.

7. Finally, press the Restart button. You will be in the BIOS menu as soon as your computer restarts after this operation.

Final Words

Whether your device is working correctly or not, you may always access the BIOS in Windows 10 using one of the techniques listed above. If you are still having difficulties accessing BIOS, please leave a remark in the comments section.

Related Articles

Leave a Comment